Product ID:FA1076 MMM-A-1617 TYPE III
MSDS Date:05/01/2000
FSC:8040
NIIN:00-152-0063
Status Code:A
MSDS Number: CKLLS

RALRUBE INC.

36977 FOX GLEN
FARMINGTON HILLS, MI 48331
US

Emergency Phone: 800-424-9300

Info Phone: 810-661-0260

Cage: 6X798

RALRUBE INC.

FARMINGTON HILLS, MI 48331 US

Telephone: 248-661-0260, FAX 248-661-3941

Cage: 6X798

ETHYL METHYL KETONE

CAS: 78-93-3

RTECS: EL6475000

OSHA PEL 590 MG/M3;200 PPM

ACGIH TLV: 590 MG/M3;200 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TETRAHYDROFURAN

CAS: 109-99-9

RTECS: LU5950000

OSHA PEL 590 MG/M3;200 PPM

ACGIH TLV: 590 MG/M3;200 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

METHYL ISO-BUTYL KETONE

CAS: 108-10-1

RTECS: SA9275000

OSHA PEL 410 MG/M3;100 PPM

ACGIH TLV: 205 MG/M3;50 PPM

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

NITRILE RUBBER (BUTADIENE-ACRYLONITRILE POLYMER)

CAS: 9003-18-3

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Health Hazards Acute and Chronic:TARGET ORGANS: MEK, BASED ON ANIMAL
DATA, MAY CAUSE LIVER ABNORMALITIES, KIDNEY, LUNG & BRAIN DAMAGE.
TERATOGEN, THF-MAY CAUSE LIVER OR KIDNEY ABNORMALITIES. MIBK-MAY
CAUSE LIVER ABNORMALITIES, LUNG O R BRAIN DAMAGE, BASED ON ANIMAL
DATA. ACUTE: NAUSEA AND/OR NARCOSIS. CHRONIC: MAY CAUSE LIVER AND
KIDNEY DAMAGE. CAN DAMAGE NERVOUS SYSTEM. WEAKNESS IN HANDS AND
FEET MAY OCCUR. MINOR EMBRYOTOXIC/FETO TOXIC EFFECTS HAVE BEEN
OBSERVED IN LABORTORY RATS EXPOSED TO MEK BY INHALATION AT LEVELS
GREATER THEN 1000 PPM (5 TIMES THE OSHA-PEL) FOR MOST OF THE
GESTATION PERIOD.
Explanation of Carcinogenicity:NO.
Effects of Overexposure:IRRITATION TO EYES AND SKIN. CAN ALSO CAUSE
SKIN DRYNESS. LIQUID INGESTION MAY RESULT IN VOMITING. CAN SEVERELY
BURN EYES. MAY CAUSE VOMITING AND DIARRHEA.
Medical Cond Aggravated by Exposure:RESPIRATORY AILMENTS, MAY CAUSE
INJURY TO LIVER AND KIDNEYS WHEN INGESTED OR INHALED AT HIGH
CONCENTRATIONS.

First Aid:IN EMERGENCY SITUATIONS NOTIFY PHYSICIAN IMMEDIATELY. SKIN:
WASH WITH SOAP AND WATER. GET MEDICAL ATTENTION. EYES: FLUSH
ABUNDANTLY WITH CLEAN WATER AND REFER TO PHYSICIAN. INGESTION: DO
NOT INDUCE V OMITING. REFER TO PHYSICIAN. EXCESSIVE INHALATION:
REMOVE PATIENT TO FRESH AIR OR GIVE OXYGEN. USE CPR IF PATIENT IS
NOT BREATHING. REFER TO PHYSICIAN.

Flash Point Method:OC
Flash Point:=-15.4C, 4.F
Autoignition Temp:=321.1C, 610.F
Lower Limits:1.4
Upper Limits:11.8
Extinguishing Media:CO2, FOAM, DRY CHEMICAL
Fire Fighting Procedures:NIOSH/MSHA-APPROVED SELF-CONTAINED BREATHING
APPARATUS SHOULD BE WORN. USE WATER SPRAY TO COOL FIRE EXPOSED
STRUCTRUES AND DISPERSE VAPOR CLOUD IF FIRE IS NOT PRESENT.
Unusual Fire/Explosion Hazard:VAPOR IS HEAVIER THAN AIR AND MAY TRAVEL
CONSIDERABLE DISTANCE TO SOURCE OF IGNITION AND FLASHBACK.

Spill Release Procedures:ABSORB SPILL IN SAND, EARTH, VERMICULITE,
OIL-DRI OR SOL-SPEED-DRI. SHOVEL ABSORBED MATERIAL INTO STEEL
CONTAINER AND COVER.

Handling and Storage Precautions:STORE IN APPROVED SOLVENT STORAGE
AREA. KEEP TIGHTLY CLOSED. KEEP AWAY FROM HEAT, OPEN FLAMES,
SPARKS, HOT SURFACES AND OXIDIZING AGENTS.

Respiratory Protection:USE NIOSH-APPROVED ATMOSHERE SUPPLYING OR AIR
PURIFYING RESPIRATOR FOR ORGANIC VAPORS AS REQUIRED TO MAINTAIN
EXPOSURE LEVELS BELOW RECOMMENDED LIMITS.
Ventilation:LOCAL EXHAUST: REMOVE VAPORS DURING PROCESSING. MECHANICAL
EXHAUST: EXPLOSION-PROOF EQUIPMENT. SPECIAL: REDUCE VAPOR
CONCENTRATIONS BELOW SPECIFIED LIMITS.
Protective Gloves:PVA GLOVES.
Eye Protection:SAFETY GLASSES.
Other Protective Equipment:PROTECTIVE CLOTHING AS REQUIRED TO PREVENT
SKIN CONTACT.
Work Hygienic Practices:KEEP AREA CLEAN. CLEAN UP SPILLS IMMEDIATELY.
PRACTICE GOOD PERSONAL HYGIENE.
Supplemental Safety and Health

HCC:F2
Boiling Pt:=65.C, 149.F
Vapor Pres:71.3 @ 20C OR 68F
Vapor Density:2.55
Spec Gravity:0.867
VOC Pounds/Gallon:648
VOC Grams/Liter:5.43
Appearance and Odor:LIGHT AMBER, SWEET PUNGENT ODOR.

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:AVOID HEAT, OPEN FLAMES, SPARKS, HOT
SURFACES, AND OXIDIZING AGENTS.
Hazardous Decomposition Products:OXIDES OF CARBON, NITROGEN ZINC,
SULFUR, HYDROGEN CHLORIDE.
Conditions to Avoid Polymerization:WILL NOT OCCUR.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL CHEMICAL AND SOLVENT WASTE DISPOSAL REGULATIONS.

Transport Information:PSN: ADHESIVE,3, UN1133, II. LTD QTY

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.